A deadbolt lock is a type of lock that provides extra security for doors. Unlike a regular latch, a deadbolt lock cannot be opened by jiggling or forcing the knob. Instead, it requires a key to turn a bolt that slides into a hole in the door frame. If you don’t know how to open a deadbolt lock with a screwdriver? Then you have reached the right place. This article will help you a lot in understanding the mechanism and process to open a deadbolt lock.
There are different types of deadbolts, such as single-cylinder, double-cylinder, and keyless. A single-cylinder deadbolt has a keyhole on one side and a thumb turn on the other. A double-cylinder deadbolt has a keyhole on both sides and no thumb turn. A keyless deadbolt has a keypad or a fingerprint scanner instead of a keyhole.
The purpose of this article is to teach you how to open a deadbolt lock with a screwdriver in case of emergency or lockout. This can be useful if you lose your key, forget your code, or need to access a locked door without permission. However, you should only use these methods in legitimate situations and not for illegal purposes.
Tools Required Open Deadbolt Lock
Knowledge about tools is very important before we learn how to open a deadbolt lock with a screwdriver. Here is the list of tools and materials that you will need:
1. Screwdriver:
You will need a screwdriver that matches the size and shape of the hole on the side of the lock. The screwdriver should be long enough to reach the thumb turn or the cylinder inside the lock. The screwdriver should also be sturdy enough to withstand the pressure and the torque you will apply. You can use a flathead, a Phillips, or a hex screwdriver, depending on the type of screw you encounter.
2.Bobby pin:
You will need a bobby pin to pick the lock if the screwdriver method fails. The bobby pin should be straightened and bent at a 90-degree angle at one end. The bobby pin will act as a tension wrench and a pick to manipulate the pins inside the cylinder.
3.Cardboard:
You will need cardboard to protect the lock and the door from further damage. The cardboard should be thick enough to cushion the impact and the friction of the tools. You can use a piece of cardboard from a box, a book, or a magazine, depending on the size and the shape of the lock and the door.
4 Best Methods to Open a Deadbolt Lock with a Screwdriver
You may be wondering how to open a deadbolt with a screwdriver, especially if you have lost your key or need to access a locked room. Fortunately, there are some ways to do it without damaging the lock or the door. In this section, we will explain three methods to open a deadbolt with a screwdriver, depending on the type and design of the lock. These methods are:
Method 1: Using a Bobby Pin and a Screwdriver
The first method to open a deadbolt lock with a screwdriver is to use a bobby pin as a makeshift pick. You will need a bobby pin and a small, flat-head screwdriver for this method.
Here are the steps to follow:
Step 1: Straighten the bobby pin and bend one end into a small hook.
Step 2: Insert the hook end of the bobby pin into the keyhole and move it up and down to find the pins Step 3. Inside the lock. You should feel some resistance when you touch a pin.
Step 4: Push the pin up until you hear a click. This means that the pin has been set in the correct position. Repeat this for all the pins until the lock is ready to turn.
Step 5: Insert the screwdriver under the bobby pin and twist it to unlock the deadbolt. You may need to apply some force to turn the lock.
Some tips and warnings for this method are:
1. Use a thin and sturdy bobby pin that can fit into the keyhole and withstand the pressure.
2. Be gentle and patient when picking the pins. Do not force or damage the lock.
3. This method may not work for some types of deadbolts, such as double cylinder or keyless.
Method 2: Using Two Bobby Pins
The second method to open a deadbolt lock with a screwdriver is to use two bobby pins as a tension wrench and a pick. You will need two bobby pins for this method.
Here are the steps to follow:
Step 1: Bend one bobby pin into a right angle and insert it into the bottom of the keyhole. This will act as a tension wrench that applies pressure to the lock.
Step 2: Bend the other bobby pin into a small hook and insert it into the top of the keyhole. This will act as a pick that lifts the pins inside the lock.
Step 3: Apply slight pressure with the tension wrench and rake the pick back and forth to lift the pins. You should hear some clicks as the pins are set in the correct position.
Step 4: Once all the pins are set, turn the tension wrench to unlock the deadbolt. You may need to adjust the pressure and the angle of the wrench to turn the lock.
Some tips and warnings for this method are:
1. Use a thick and strong bobby pin for the tension wrench and a thin and flexible one for the pick.
2. You should not put in too much force may cause stick the lock.
3. This method may not work for some types of deadbolts, such as double cylinder or keyless.
Method 3: Using a Drill or an Impact Wrench
The third method to open a deadbolt lock with a screwdriver is to use a drill or an impact wrench to destroy the lock. You will need a drill or an impact wrench with a suitable bit for this method.
Here are the steps to follow:
Step 1: Drill or wrench the hole on the side of the lock where the screws are located. This will expose the lock cylinder and the bolt mechanism.
Step 2: Remove the screws and the lock cylinder with a screwdriver or a plier. This will leave a hole in the door where the lock used to be.
Step 3: Turn the bolt with a screwdriver or a plier to unlock the deadbolt. You may need to wiggle or pry the bolt to move it.
Some tips and warnings for this method are:
1: Use a drill or an impact wrench that can penetrate the metal of the lock. Choose a bit that matches the size of the screws and the hole.
2: Wear protective gear such as gloves, goggles, and earplugs when using the drill or the impact wrench. Be careful of sparks, debris, and noise.
3: This method will permanently damage the lock and the door. You will need to replace the lock and repair the door after opening it.
Method 4: Using Cardboard to Open Deadbolt Lock
If you are still worried about how to open a deadbolt lock with a screwdriver? Then you can use our fourth method which is easy and effective. You will need a screwdriver and cardboard to use this method. Let’s explore how this method works:
Here are the steps to follow:
Step 1: Push the screwdriver into the lock’s hole until you meet resistance.
Step 2: Push the screwdriver into the lock’s hole until you meet resistance. Loosen the screw that secures the lock by rotating the screwdriver both ways.
Step 3: Pull the screwdriver out and remove the lock. You may need to wiggle the lock a bit to get it out.
Step 4: Use the screwdriver to turn the thumb turn or the cylinder on the back of the lock. This will unlock the deadbolt and open the door.
Step 5: If the lock is damaged or broken, you may want to replace it with a new one. Otherwise, reattach the lock to the door by reversing the steps above.
Step 6: Use cardboard to cover the hole to prevent further damage to the lock and the door, and the screw on the side of the lock. Tape the cardboard securely to the lock and the door.
Some tips and warnings for this method are:
1. Find cardboard that has the same color and texture as the lock and door. This will make the cardboard less noticeable and more aesthetic.
2. Strong and discreet tape, such as duct tape or masking tape, can attach the cardboard to the lock and door. This will ensure that the cardboard stays in place and does not fall off easily.
Bonus Tip:
After reading the article how to open a deadbolt lock with a screwdriver, you will be able to open deadbolt lock. This information is provided for only information purpose, so don’t apply on any unauthorized property. If you still can’t succeed and looking for professional locksmith service, then there is no need to worry about it.
Introducing Patriot Locksmith Service, providing services in all over in Missouri. We highly recommend this locksmith service, because we have personally experienced their service. They are expert in their work because of experienced workers.
Video Guidance:
Here is a video guidance for you to make it easy to learn how to open a deadbolt lock with a screwdriver. Let’s explore how to works:
Conclusion
In this article, you learned how to open a deadbolt lock with a screwdriver using three different methods: using a bobby pin and a screwdriver, using two bobby pins, and using a drill or an impact wrench. Each method has its pros and cons, depending on the type of deadbolt, the tools available, and the level of difficulty.
You should only use these methods in emergencies and not for illegal purposes. Opening a deadbolt lock without a key or a code may be considered a crime or a breach of privacy. You may also damage the lock and the door, which can be costly to fix.
To avoid lockouts, you should keep a spare key in a safe place, install a smart lock that can be opened with your phone or your voice, or call a locksmith who can open the lock professionally and legally.